Important Notices:
✔ Be sure the working temperature is above 0℃（32℉) because the motorized arms would not open/close below 0℃. If your living area is cold, we suggest you warm up the holder from hot air blowing on it from the vent before using the holder.
✔ Please plug the cable into the QC3.0 car charger to ensure that the motor have enough electricity when you clamp or release the phone, or the clamping arms don’t move.
✔ About the car charger: Please Plug the cable into QC 2.0/3.0 car charger to ensure fast charging; Non-QC car charger, 2.4A car charger or USB Port don’t support fast charging and supply enough power to this device. Package comes with 4.92FT/1.5M Micro USB Cable, but Car Cigar Lighter are not included.
✔ About the Phone case: Please remove Uneven or rugged case,metal ring holder, metal attachments and credit cards for optimal charging. Be sure your phone case is NOT thicker than 4mm (0.16 inches) .
✔ About the Charging Coil alignment: Please adjust the bottom bracket to make the phone at the wireless charging Inductive center. It will fail to charge if placed improperly.
✔ Preventing your phone from overheating: We suggest you close Apps to reduce power consumtion and turn off phone screen during wireless charging.
✔ Red Light Means Unable to Charge: 1) Please adjust the telescope tray to align; 2) the case isn’t compatible with wireless charging; 3) plug the cable into the QC2.0/3.0 Car Charger.
【Smart Automatic Opening and Clamping Clips Design】One hand operation, containing a built-in advanced sensor. Two clips of the mount will automatically opening, close and grip your phone when the phone is attached to the holder; To release the phone, press quick-release button on any side ,the clips will automatically open ,then you can take the phone out.(if the clip could not open automatically, please click the Green button which in the bottom of the wireless charger to turn on the sensor.)
【Wireless Fast Car Charger Mount】MANKIW 2-IN-1 Design combines charger with phone holder in one unit. Pull down the bottom bracket to keep the phone and coils aligned so that wireless charging pad offers a quickly charger while driving. Keep you away from the tangled locating cords or cables. Cell phone holder is suitable for car Windshield Dashboard Air Vent installation, and makes GPS and phone call more convenient.
【Thick Case Friendly & Faster Charging】No need to remove your phone case (most of phone cases in the market except rugged, uneven case.)while charging.The car holder can hold all phones with a width of 60-80mm tightly, which works very well for all QI-enabled phones. .For 10W, 7.5W fast charging mode, QC 3.0 car charger adapter is required as its power source.
【Stable Sucker, Adjustable View】Secure sucker sticks tightly on the dashboard or most surfaces. The dashboard car mount has two ways to move and adjust, the adjustable arm and 360° joint ball could help you find the most suitable angle for safe driving. What’s more, a ventilation holder are equipped, allowing the charger to be flexibly mounted on the car air vent.
【Compatibility and Warranty】Suitable for cellphones between 4-6.5 inches, Compatible with any Qi-Enabled cellphones.
